Use this task to enable SES-Imagotag.
-
Prepare the AP device:
-
Ensure that the access
point is getting 3AT/3AT+ power.
-
Connect ESL communicator
to access point USB port.
-
Ensure that the LED on
the ESL communicator is red.
-
In ExtremeCloud IQ, Enable
SES-Imagotag on the AP Device Template or Override for a
supported AP model.
The following access points support SES-Imagotag:
-
Ensure that the LED on the ESL communicator is amber.
Important
Troubleshooting Tips:
- No LED light on ESL communicator
- Check the power supply. The AP requires 3AT/3AT+ power supply to work
with a USB port.
- The LED continues to be red
- Check the AP logs to verify that ThinAP2 has started.
- The LED continues to be Amber
- Check the IP address of AP, the AP-ID, and the connectivity between the
AP and the ESL server.
